If you want to keep your online activity private and access the geo-restricted content on your Apple TV, you’ll need to use a VPN.
To tell you how a VPN works, it geo-spoofs your location by re-routing your traffic through a server in another country. This tricks websites into thinking you’re located in that country, allowing you to access content that would otherwise be unavailable to you.
While Apple TV doesn’t have built-in support for VPNs, there’s still a way to install Surfshark on Apple TV and take advantage of all its features.
In this guide, we’ll show you how to install Surfshark on Apple TV using four different methods.
So without wasting any time, let’s get started!
Short on time? Here’s a Short Summary of How to Install Surfshark On Apple TV
- Go to the Surfshark website and head to the Smart DNS section.
- Activate Smart DNS.
- Note down the three visible DNS server IP addresses.
- On your Apple TV, choose your Wi-Fi connection and go to manual configuration for DNS.
- Enter any one DNS server IP address in the correct section and press Done.
- Restart your Apple TV and enjoy streaming your favorite shows that were geo-blocked before.
To know more about Surfshark, visit our dedicated guide: How Does Surfshark VPN Work
How to Install Surfshark On Apple TV?
You can install Surfshark on Apple TV in the following ways:
- Install Surfshark directly on your router and connect Apple TV to that network.
- Use Surfshark’s Smart DNS feature and bypass geo-blocks on your favorite streaming platforms.
- Create a VPN-enabled virtual router on your Windows or Mac PC and connect Apple TV to that network connection.
- Use the iOS feature “AirPlay” to cast the content of your iPhone or iPad on your Apple TV.
We have explained all these methods with step-by-step guidelines below.
Method # 1: How to Install Surfshark On Apple TV Via Router?
A VPN router will protect all of your family’s internet-connected devices. This eliminates the need to set up a VPN on each device separately.
Surfshark may be easily installed on Asus routers. If that’s not the case, don’t worry. Both DD-WRT and Tomato are supported by Surfshark.
To get started, simply check to see whether your router is compatible with third-party firmware. After that, install the corresponding version of the firmware on your router and you’re ready to go.
Before flashing your router, conduct thorough research. Because it’s a delicate operation that may harm your router if you make a mistake halfway through.
If you’re not confident in your abilities, it might be a better idea to purchase a pre-flashed Surfshark router. FlashRouters are one of the authentic providers that offer pre-flashed customized routers.
For step-by-step guidelines, visit our detailed guide on how to install Surfshark on a router.
Method # 2: How to Install Surfshark On Apple TV Via Smart DNS?
If you don’t want to go through the hassle of setting up a VPN on your router, you can configure Surfshark’s Smart DNS on Apple TV.
Surfshark offers a Smart DNS service that can be used to unblock geo-restricted content on streaming platforms like Netflix, Hulu, BBC iPlayer, and more.
Smart DNS does not encrypt your traffic like a VPN. However, it does reroute your DNS requests through a server in a location of your choosing.
This allows you to bypass geo-restrictions and access content that would otherwise be unavailable in your region.
To install Surfshark’s Smart DNS on Apple TV, follow the steps below:
Step 1: Sign up for a Surfshark plan.
Step 2: Go to the Surfshark website or just click here.
Step 3: Sign in with your Surfshark account.
Step 4: Click on “Smart DNS” on the left panel and then click on “Get Started“.
Step 5: Click on “Activate Smart DNS“.
Step 6: You’ll see three DNS server IP addresses. Note them down, we’ll need them later.
Step 7: Turn on your Apple TV and go to Settings.
Step 8: Head to Network.
Step 9: Select your Wi-Fi network.
Step 10: Select “Configure DNS” and then select “Manual“.
Step 11: Now enter the first DNS server IP address from Step 6. Press Done.
Step 12: Reboot your Apple TV and check if you can access other libraries of streaming platforms. If you can’t, try entering the second or third DNS server IP addresses from Step 6 instead of the first one.
That’s all you need to do! You have now successfully configured Surfshark’s Smart DNS on your Apple TV.
Keep in mind that while Smart DNS allows you to access geo-blocked content, it does not encrypt your traffic like a VPN.
Method # 3: How to Install Surfshark On Apple TV By Creating a Virtual Router?
A virtual router allows you to share your VPN connection with other devices.
This is a great way to use Surfshark on Apple TV if you don’t want to go through the hassle of setting up a physical router.
You can set up a virtual router on your Windows or Mac computer.
Once the virtual router is up and running, you can connect your Apple TV to it and start streaming geo-blocked content from anywhere in the world.
But the catch is that your computer must be running all the time for the virtual router to work.
And if you’re not using a wired connection, your computer’s battery will drain faster. We’ll show you both methods, Wireless and Wired.
Here’s how you can create a virtual router on your computer.
We’re gonna follow the wireless method using Windows 10. But you can go for the wired connection method for Windows too.
Step 1: Go to the Settings and head to Network & Internet.
Step 2: Click on Mobile Hotspot on the left panel and turn on the toggle button for Mobile Hotspot.
Step 3: Now click on Status on the left panel and then click on Change Adapter Options on the right panel.
Step 4: Find the network that says “TAP-Surfshark Windows Adapter V9“. Right-click on it and go to Properties.
Step 5: Head to the Sharing tab and check the box that says “Allow other network users to connect through this computer’s internet connection“.
Step 6: Click on the drop-down menu under Home Networking Connection and select your newly created connection.
Step 7: Launch the Surfshark VPN app and connect to a VPN server of your preference.
Step 8: You are now sharing your Surfshark VPN connection. Connect your Apple TV to the network connection you created.
Done! You’ve now successfully configured Surfshark on your Apple TV by creating a virtual router.
We’re gonna follow the wired connection method with a Mac computer. But you can also set up a wireless connection with your Mac.
Step 1: Download the Surfshark VPN app from App Store.
Step 2: Use an ethernet cable to plug in one end to your Mac PC and the other end to your Apple TV.
Step 3: Launch the Surfshark VPN app on your Mac and sign in with your credentials.
Step 4: Head to the Settings and go to Protocols. Choose the “OpenVPN (UDP)” protocol.
Step 5: Connect to a location server of your choice. For example, if you want to unlock the Netflix library of US, connect to a US server.
Step 6: Now that you’re connected to the VPN, click on the Apple icon on top.
Step 7: Go to System Preferences and head to Sharing.
Step 8: On the left panel, click on Internet Sharing.
Step 9: Click on “Share your connection from” and choose “Surfshark OpenVPN (UDP)“.
Step 10: Place a tick on “Wi-Fi” and then fill in the following information by clicking “Wi-Fi Options“:
- Network Name: (Enter a name for your Wi-Fi network)
- Channel: 11
- Security: WPA2 Personal
- Password: (Set a unique password for your Wi-Fi network)
Step 11: Now click on OK and then place a tick on Internet Sharing in the left panel.
Step 12: If you see a warning message after ticking Internet Sharing, press Start.
Step 13: Now turn on your Apple TV and connect it to your newly created Wi-Fi network.
Step 14: Reboot your Apple TV and launch your favorite streaming platform.
And you’re done! You’ve now configured Surfshark on your Apple TV through a wired connection.
Method # 4: Using the iOS AirPlay Feature
If you have an iPhone or iPad, you can use the AirPlay feature to cast your screen to Apple TV.
It’s a convenient method since you don’t have to do any configuring on your computer.
Just make sure that both, your iOS device and Apple TV are on the same Wi-Fi network because this method will not work if you’re using mobile data.
Here’s how you can use AirPlay to cast your screen to Apple TV:
Step 1: Launch the Surfshark VPN app on your iOS device.
Step 2: Connect to a location server where the content you want is available. For example, if you want to access Netflix Ireland, connect to an Ireland server.
Step 3: Now launch the streaming service app on your iOS device.
Step 4: Once the video starts playing, tap the AirPlay icon on the top right corner.
Step 5: Look out for your Apple TV under the “Speakers & TV” section.
You can now see the content of your iOS device on your Apple TV.
This is an ideal method if you want to watch content from your iPhone or iPad on the big screen.
You can also use this method to cast other supported apps from your iOS device to Apple TV, such as YouTube and Hulu.
Why You Should Use Surfshark On Apple TV?
Surfshark offers a lot of features that make it the ideal VPN for streaming. Some of them are:
- AES 256-bit Encryption: Surfshark VPN uses the most advanced encryption standard to protect your data. With AES 256-bit encryption, your data is safe from prying eyes.
- No-Logs Policy: Surfshark VPN doesn’t keep any logs of your online activity. This means that your identity and location are always confidential. It has also been proved as Surfshark has been independently audited.
- Unlimited Server Connections: With Surfshark VPN, you can connect to more than 3000 servers in 60 countries. This gives you the freedom to unblock any content from around the world.
- 30-Day Money-Back Guarantee: If you’re not satisfied with Surfshark VPN, you can get a full refund within 30 days. This allows you to try a top-tier VPN risk-free.
- Streaming Support: With Surfshark’s 3000+ pool of servers, you can change your Netflix region or Hulu region to almost any other location to enjoy unlimited streaming with no buffering.
- Unlimited Simultaneous Connections: Surfshark is one of the few VPN providers that doesn’t have a limit on simultaneous connections. You can connect as many devices as you want to your Surfshark account and enjoy a secure internet connection on all of them.
- Smart DNS Feature: In addition to VPN, Surfshark also offers a Smart DNS feature. With this feature, you can unblock geo-restricted content without encrypting your traffic. This means that you can enjoy streaming without any buffering or speed issues.
- Multi-Hop: A Multi-Hop or Double VPN feature routes your traffic through multiple VPN servers to guard your online privacy. Surfshark’s Multi-Hop feature routes your traffic through two VPN servers instead of one. This makes it even more difficult for anyone to track your online activity.
- CleanWeb: Surfshark’s CleanWeb feature blocks ads, malware, and phishing attempts. It also protects you from being tracked by third-party cookies.
- Built-in Kill Switch: A Kill Switch is a vital feature for any VPN user. It disconnects your internet connection if your VPN connection drops to prevent your data from being exposed. Surfshark’s built-in Kill Switch ensures that your data is always protected.
Surfshark Plans & Pricing
Surfshark offers three different plans:
- Monthly plan: $12.95/month
- Yearly plan: $47.88/year for the first time and then $59.76 annually.
- Two-year plan: $59.76 for the first time for two years and then $59.76 annually.
Each of these plans comes with a 30-day money-back guarantee so you can try Surfshark risk-free. Also, Surfshark supports a wide range of payments methods including credit cards, PayPal, cryptocurrency, and more.
Frequently Asked Questions
Does Surfshark work with Apple TV?
Surfshark does not have a native app for Apple TV but you can use it with Apple TV by casting other supported apps from your iOS device to Apple TV or by using the Smart DNS feature.
How many devices can I connect to Surfshark?
Surfshark allows you to connect an unlimited number of devices to your account. This means that you can use Surfshark on all of your devices and enjoy a secure internet connection on all of them.
Does Surfshark have a free trial?
No, Surfshark does not offer a free trial. However, it does have a 30-day money-back guarantee so you can try it risk-free. If you’re not satisfied with Surfshark, you can get a full refund within 30 days.
CleanWeb is a Surfshark feature that blocks ads, malware, and phishing attempts. It also protects you from being tracked by third-party cookies. CleanWeb is available on all Surfshark plans.
A Kill Switch is a vital feature for any VPN user. It disconnects your internet connection if your VPN connection drops to prevent your data from being exposed. Surfshark’s built-in Kill Switch ensures that your data is always protected.
Which router does Surfshark support?
Surfshark works best with Asus routers. Other than that, Surfshark supports routers that are compatible with third-party firmware like DD-WRT or Tomato but you’ll have to flash your router first.
Surfshark is a great VPN for streaming because it offers a lot of features that are beneficial for streaming such as unlimited server connections, Multi-Hop, CleanWeb, and more.
It also has a large pool of servers from which you can connect to any location and bypass geo-blocks. We hope this guide has helped you understand how to install Surfshark on Apple TV with no hassles.
If you have any questions, please feel free to ask them in the comments section below. Thanks for reading!